商品の詳細 Measurement Configuration Cell connectors :2-,3-or 4-terminal, all floating Working electrode current measurement resistor (Rs) range:0.1Ω to 1M Ω Full scale current ranges:2 A to 200 nA, max. resolution 1 pA Limit of error:0.1% ± 0.05% of range Counter electrode output voltage,wrt LO:±20 V Current, subject to thermal protection limits:2 A Slew rate, potentiostatic control:10 V/μs Reference Electrodes Input impedance:10 G Ω Input capacitance:50 pF Max. resolution 1 μV Limit of error:0.1%±100 μV DC Polarization Range ±14.5 V Limits of error:V3.2 V: 0.2%±200 μV V3.2 V: 0.2%± mV Max resolution:100 μV Current range: ±2 A Limit of error: 0.2% ±0.1% of range Max resolution: 100 pA DC Sweep: (continuous and stepped ramp) Type analog ramp ramp rate (voltage): 10μV/s to 100 V/s Segment duration: 10 ms to 105 s Stepped ramp step height: 5 μV/5 pA to 29 v/4A Step duration: 10 ms to 105 s AC Polarization Waveform Sine Frequency range: 1 mHz to 20 kHz resolution: 1 part in 4000 Amplitude ranges 0 to 10 V peak: 10 mV resolution, 0 to 100 mV peak: 100 μV resolution Distortion 1% Integration time 0.1 to 105s Power supply 90 to 110V, 108 to 132V, 198 to 242V, 216 to 264, 48Hz to 65Hz Power consumption 240VA Dimensions (w x h x d) 437mm x 198mm x 457mm (17.2in x 7.8in x 18in) Weight 18.5kg (41lb) Operating temp. range 0 to 50C (32 to 122F)
【正常動作品】Solartron 1280C
電気化学測定・インピーダンス測定装置
商品の状態
この商品は動作確認済みの品です
ソフトのライセンスはありません※別途購入要
保証1ヶ月・・・1ヶ月以内の故障は無償にて修理・交換致します。
保証期間後は有償にて修理対応致します。※ジャンク品を除く
※過大入力等、不注意による故障は対象外となります。
※返送時の送料はご負担願います。
※修理の場合は返金等で対応させて頂きます。
商品の詳細
Measurement Configuration
Cell connectors :2-,3-or 4-terminal, all floating
Working electrode current
measurement resistor (Rs) range:0.1Ω to 1M
Ω Full scale current ranges:2 A to 200 nA, max. resolution 1 pA
Limit of error:0.1% ± 0.05% of range
Counter electrode output voltage,wrt LO:±20 V
Current, subject to thermal protection limits:2 A
Slew rate, potentiostatic control:10 V/μs
Reference Electrodes
Input impedance:10 G
Ω Input capacitance:50 pF
Max. resolution 1 μV
Limit of error:0.1%±100 μV
DC Polarization
Range ±14.5 V
Limits of error:V3.2 V: 0.2%±200 μV
V3.2 V: 0.2%± mV
Max resolution:100 μV
Current range: ±2 A
Limit of error: 0.2% ±0.1% of range
Max resolution: 100 pA
DC Sweep: (continuous and stepped ramp)
Type analog ramp ramp rate (voltage): 10μV/s to 100 V/s
Segment duration: 10 ms to 105 s
Stepped ramp step height: 5 μV/5 pA to 29 v/4A
Step duration: 10 ms to 105 s
AC Polarization
Waveform Sine
Frequency range: 1 mHz to 20 kHz
resolution: 1 part in 4000
Amplitude ranges 0 to 10 V peak: 10 mV resolution, 0 to 100 mV peak: 100 μV resolution
Distortion 1%
Integration time 0.1 to 105s
Power supply 90 to 110V, 108 to 132V, 198 to 242V, 216 to 264, 48Hz to 65Hz
Power consumption 240VA
Dimensions (w x h x d) 437mm x 198mm x 457mm (17.2in x 7.8in x 18in)
Weight 18.5kg (41lb)
Operating temp. range 0 to 50C (32 to 122F)
付属品 12861 ECI Test Module
電源コード
GPIBケーブル
BNCケーブル
BNC(m) bananaケーブル
Banana-Aligeterケーブル
マニュアル
動作状況を示すために出品物以外の 測定器やケーブル等が写真に写りこんでいる場合がございますが、 上記以外の物は一切付属致しませんのでご了承ください。
発送詳細